Wet Scrubbing system offered by Crystal
are either Ejector Ventury Scrubbers
or packed towers or combination of
Ejector Ventury Scrubbers with Packed
Towers.
The Ejector Venturi Scrubber provides
both the functions of scrubbing and
creates system draft. Ejector Venturi
Scrubber utilize the energy of the
scrubbing liquid to effectively entrain
& remove noxious gases, particulates, odours, fumes and dusts from the gas. Gaseous
pollutants and odours are removed through absorption & or chemical reaction between
the gases & scrubbing liquid. In addition to providing effective scrubbing Ejector Venturi
Scrubber also produces an air moving and/or static pressure boosting capability for the
system.
Packed Tower Scrubber is a low energy, contact bed type of wet scrubber for gas
absorption, for gas cooling and for stripping of the contaminants from process liquids.
The units are specifically engineered to give highest efficiency with the lowest power
consumption without sacrificing the performance reliability. Severn Trent packed Tower
Scrubbers are available in standard designs from 6" to 144" diameter & with capacities
upto 50,000 ACFM.
High Energy Ventury Scrubber
High Energy Ventury Scrubbers are designed for the
removal of sub-micron fumes, mists & particulates.
The gas is accelerated into the throat of the
venturi where high velocity gas stream shatters the
scrubbing liquid into fine droplets which mix with and
impinge on the fine fumes, mists and particulates
to effect the required removal efficiency. The
High Energy Ventury Scrubbers can have either a
fixed throat type or with a annular fixed throat type
or variable throat type to vary the capacity of
the scrubber.
